HARLEY-DAVIDSON MODULE TURN SIGNAL CONTROL 68540-96 Replace product 68540-96

  
OEM Part Number/Cross Reference: 68540-96. 95mm x 51mm x 15mm (excluding connectors).

Contents: 1 Turn Signal Module. These specifications are equivalent to the factory turn signal module. The auto-cancel function does not work with aftermarket speedometers. Not compatible with vehicles equipped with a turn signal relay due to a different circuit configuration.

Since the driving condition is determined by receiving signals from the analog meter, the cancel operation may be approximate. Hazard lights may not activate if the signal is input for a short period of time.

Turning on the turn signal too early while decelerating may cancel the turn signal before cornering. Thank you for your understanding. This is a replacement for the factory turn signal module. Turn signal operation (left and right).

Turn signal automatic cancel due to speed change. Hazard lights (press left and right simultaneously). Additionally, it has the following features: (Equivalent to factory settings).

When one turn signal is flashing, pressing the other turn signal switch will cause the other turn signal to start flashing. The hazard light input responds even to simultaneous presses with approximate timing, making operation easy. Hazard lights will activate at any time by pressing the other turn signal while holding down one turn signal. Conversely, hazard lights may not activate if the input is short-lived.

If one turn signal bulb burns out, the other bulb will light up, indicating a malfunction. Please feel free to ask questions. International Buyers - Please Note.